Casa > produtos > Filtro de FWDM >

FWDM MODULE MUX/DEMUX 1260-1660nm FTTH GPON 1290-1330&1480-1500nm NGA 1260-1280&1575-1650nm, Single mode Edge Filter WDM OADM

FWDM module FTTH GPON compatible

Single mode Edge Filter WDM

FWDM MUX/DEMUX 1260-1660nm

Lugar de origem:

China

Marca:

HJY

Certificação:

ISO9001

Número do modelo:

WDM

Contacte-nos

Peça umas citações

FWDM MODULE MUX/DEMUX 1260-1660nm FTTH GPON 1290-1330&1480-1500nm NGA 1260-1280&1575-1650nm, Single mode Edge Filter WDM OADM

Detalhes do produto

Isolamento (NGA):

> DB 30

Isolamento (GPON):

> 25 dB

Faixa de comprimento de onda Com:

1260-1650nm

Faixa de comprimento de onda da porta1:

1290-1330 e 1480-1500 nm

Faixa de comprimento de onda da porta2:

1260-1280 e 1575-1650 nm

Perda de inserção:

≤ 0,6dB

Perda de retorno:

> DB 45

Diretividade:

> DB 50

Máxima potência:

300 mW

Pacote Tipo:

Caixa ABS

ConnectorType:

SC/UPC ou outro

Tipo de fibra:

Corning SMF-28E

Temperatura operacional:

-40~+85

Tipo:

Filtro ótico

Destacar:

FWDM module FTTH GPON compatible

Single mode Edge Filter WDM

FWDM MUX/DEMUX 1260-1660nm

Termos do pagamento & do transporte

Quantidade de ordem mínima

10 unidades

Preço

12-1000

Detalhes da embalagem

100*80*10CM

Tempo de entrega

5-8 DIAS DE TRABALHO

Termos de pagamento

L/C, T/T

Habilidade da fonte

1500 por semana

PRODUTOS CONEXOS

FWDM 1650nm reflexo filtro WDM mux o comprimento de onda do OTDR 1650nm com 1310/1550 comprimento de onda e saída será 1650+1310/1550 T1260-1610 R 1625-1670

Obtenha o melhor preço

Vídeo

1650nm WDM Filtro FWDM Filtro Fibra Óptica Patch Cable para separação de sinal

Obtenha o melhor preço

Vídeo

Filtro FTTH FWDM de canal único 3 portas Perda dependente de baixa polarização

Obtenha o melhor preço

Vídeo

High Power 500mW FWDM Filter Fiber Patch para amplificadores ópticos DWDM e EDFA

Obtenha o melhor preço

Contacte-nos

Contato agora

Descrição do produto

Product Description

Single Channel 3 Ports FTTH FWDM Filter with Low Polarization Dependent Loss and Exceptional Reliability and Stability

HJY provides provide Passive FWDM Filter TX11260-1280&1575-1650 RX 1290-1330&1480-1500 is low loss and reliable performances. It works in FTTH/FTTX, in GPON (Support GEPON,XGS-PON,NG-PON2) system works on 1290-1330&1480-1500nm,and CATV signal is delivered over same fiber using 1550±10nm.

FTTX Filter WDM module extensively used in EDFA, Raman amplifiers, WDM networks, and fiber optics instrumentation is based on Thin Film Filter (TFF) technology. The device combines or separates light at different wavelengths in a wide wavelength range. It can expand the capacity of a single fiber to achieve bi-directional communication so that widely used in optical network upgrades and expansion, or introduce new comprehensive business, etc

Package Information

Note:Fiber diameter can be 0.9mm/2.0mm/3.0mm. Fiber length is 1M or others. Connector can be LC/SC/FC, or others. If you want to order, please check with us first.

Features Applications

· Low Insertion Loss   · FWDM Network
· High Channel Isolation   · Add/Drop System
· Optical path epoxy free · CATV Fiberoptic System
· Excellent thermal stability and reliability    · Metro/Access Network
· Good channel-to-channel uniformity · Fiber Optical Amplifier
· Wide Operating Wavelength: 1260nm-1660nm
· Wide Operating Temperature: -20 to +70℃
· Telcordia GR-1221 Compliance and RoHS Environmental Protection Standard.

Product Parameters

Wavelength	1260-1660nm	Technology	TFF (Thin Film Filter)
Passband	1260-1280&1575-1650nm	Reflection	1290-1330&1480-1500nm
Passband ripple	≤0.30dB	IL @ Passband	≤0.60dB
Reflection band ripple	≤0.20dB	IL @Reflection	≤0.40dB
Transmission isolation (adj channel)	≥30dB	Transmission isolation (non-adj channel)	≥50dB
Reflection isolation	≥25dB	Polarization dependent loss	≤0.1dB
Polarization mode dispersion	≤0.2ps	Thermal Stability	≤0.005N
Directivity	≥50dB	Return loss	≥45dB
Maximum Power Handing	300mW	Temperature	Operating -20 to 70°C Storage -40 to 85°C
Fiber type	Corning SMF-28e	Package dimension	Steel ∮5.5 x L34mm ABS 1008010nm

Application Diagram
The Filter WDM system uses a Multiplexer at the transmitter to combine several wavelengths together, each one carry different signal with bite-rate up to 10G and a demultiplexer at the receiver to split them apart. Due to its low insertion loss, low polarization dependence and high isolation, the filter is widely used in CATV system, FTTx and PON system, Fiber Communication, Test Instrument and etc.

Ordering Information:

HJY-FW

Package

Connector Type

U/A

Wavelength

Fiber Type

Fiber Length

Ports Type

S: Steel

B: ABS BOX

Others

0: No connector

1: LC

2: SC

3: FC

4: Others

U: UPC

A: APC

T: Transmission wavelength range (nm)

R: Transmission wavelength range (nm)

9: 0.9mm
20:2.0mm
30:2.0mm

Others

005: 0.5+/-0.1m

01: 1.0+/-0.1m

others

Com

Reflect
Pass

Note.

1) All the specifications are based on the devices without connectors, and guaranteed over wavelength, polarization and temperature.
2)PMD and chromatic dispersion values are guaranteed by design.
3) Specifications are subject to change without notice

Tags:

FWDM MODULE MUX/DEMUX 1260-1660nm FTTH GPON 1290-1330&1480-1500nm NGA 1260-1280&1575-1650nm, Single mode Edge Filter WDM OADM

FWDM module FTTH GPON compatible

Single mode Edge Filter WDM

FWDM MUX/DEMUX 1260-1660nm

FWDM module FTTH GPON compatible

Single mode Edge Filter WDM

FWDM MUX/DEMUX 1260-1660nm

FWDM 1650nm reflexo filtro WDM mux o comprimento de onda do OTDR 1650nm com 1310/1550 comprimento de onda e saída será 1650+1310/1550 T1260-1610 R 1625-1670

1650nm WDM Filtro FWDM Filtro Fibra Óptica Patch Cable para separação de sinal

Filtro FTTH FWDM de canal único 3 portas Perda dependente de baixa polarização

High Power 500mW FWDM Filter Fiber Patch para amplificadores ópticos DWDM e EDFA

Single Channel 3 Ports FTTH FWDM Filter with Low Polarization Dependent Loss and Exceptional Reliability and Stability

wdm filter

dwdm filter

fiber patch

Filtro WDM

Filtro DWDM

Parche de fibra